Gel Acrylics na-ewepụ 5 n'ime 1 Tapered carbide ntu Drill bit Milling Cutter

Gel Acrylics na-ewepụ 5 n'ime 1 Tapered carbide ntu Drill bit Milling Cutter egosipụtara
  • Gel Acrylics na-ewepụ 5 n'ime 1 Tapered carbide ntu Drill bit Milling Cutter
  • Gel Acrylics na-ewepụ 5 n'ime 1 Tapered carbide ntu Drill bit Milling Cutter
  • Gel Acrylics na-ewepụ 5 n'ime 1 Tapered carbide ntu Drill bit Milling Cutter

Nkọwa dị mkpirikpi:

Kedu ihe bụ mgbanaka ntu carbide?

Carbide ntu egwuru ihea na-eme ihe dị elu nke carbide, ya mere ọ nwere ogologo ndụ ọrụ. O nwere obere ihe iji mee ka ọ dị mfe ma sie ike. Anyị nwere ike nkọ, ire ụtọ na polishing gel na acrylic mbọ ngwa ngwa na nke ọma. Ọ dabara maka acrylic na ezigbo mbọ, dị mma maka ịkpụcha mbọ aka na pedicure, enwere ike iji ya ogologo oge. Ọ siri ike dị n'akụkụ diamond, ma dabara ọtụtụ igwe ntu na-eji 3/32 inch.

 


Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwapụta ngwaahịa

Ụdị: Carbide Ntu Drill Bit
Ihe: Carbide & igwe anaghị agba nchara
Mkpokọta ibu: Ihe ruru. 6.0g / 0.2oz
Ogo ọjà: % 6.60 mm
Dayameta nke Isi: 6mm 6.6mm 4mm
Ogologo isi: 13mm 13.8mm 14.5mm 15mm
Agba nke isi: ọlaọcha, ọla edo, nano na-acha anụnụ anụnụ, odo odo, egwurugwu, nwa
Shank: 3/32" (2.35 mm)
Grit: Site na mma ruo na nke siri ike: 3XF 2XF XF F (mma) M (ọkara) C (nke siri ike) XC 2XC 3XC 4XC 5XC
MOQ: 50pcs ọ bụla
Ojiji: Ntu ntu,Akpụkpọ anụ, Ntucha mbọ, faịlụ ntu, Ụlọ nka nka, Pedicure
ahaziri: OEM/ODM,
Anyị bụ nnukwu ụlọ ọrụ abrasive ọkachamara na China. OEM na ODM Otu nkwụsị ọrụ ahaziri.

Atụmatụ nke carbide nail drill bit?

Carbide ntu egwu egwudị mma na ejiji, Ọ nwere ike ịbanye na nsọtụ ntu ahụ iji hichaa cuticles na-enweghị ịcha mbọ, ọ nwere ike ichebe ma ghara imerụ ahụ gị ahụ, na-enye gị ahụmahụ ntu dị mma ma dị mma. Ntu ntu Carbide na-emepụta obere uzuzu na obere esemokwu na okpomọkụ. Ọ bụ onyinye zuru oke maka ụlọ ịsa ahụ na onye hụrụ nka ntu n'onwe ya n'anya n'ụlọ.

Uru anyị nke carbide nail drill bit?

1. Anyị nwere usoro njirimara akpọrọ 5 na 1Carbide ntu egwu egwu, n'ihi na ịdị arọ na-agbanwe site n'elu ruo n'ala, site na mma gaa na nke siri ike. Ntu ntu Carbide nwere ntụzịaka ntụgharị abụọ maka aka ekpe na aka nri. Ọ nwere ike wepu mbọ aka acrylic, mbọ gel, ntụ ntụ ntụ na agba mbọ ọ bụla nwere oke arụmọrụ. Ọ dị ezigbo mma n'ịgwọ mbọ gel dị oke oke na hyper-keratosis.

2. Ogologo na-adịte aka ma dị mfe ihicha. Pụrụ iche eji contour, na-akpụzi elu na bevel, ebelata na backfill ọnwụ.

3. Carbide Ntu Drill Bitsemebere ka ewepụrụ gel ntu ngwa ngwa, ọ gaghị emebi akpụkpọ gị na mbọ eke. Ha nwere ike na-eji maka polishing ntu elu na sidewalls na uko ebe, pụrụ iche na-eji contour, na-akpụzi elu, ebelata na backfill ọnwụ.

  • Nke gara aga:
  • Osote:

    • Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya

    Ngwaahịa ndị metụtara

    Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya